2×2 Cable End Strippers

Cable End Strippers

Part number: TM10297
Category:

Product Enquiry

Description

Model

  • 2×2 Plus
  • 146mm length
  • 227 g weight

Overview

  • Double-sided design accommodates two bushings that easily change out with a hex wrench
  • Efficiently & precisely strip 600V secondary cable without damaging the conductor, even in cold climates
  • Compatible square or chamfer cut bushings for stripping 45 mil to 95 mil secondary insulations with concentric, compressed or compacted conductors #6 AWG to 750 kcmil
  • Guarded bushing cutting blades prevent injury

Replacement cutting blades are available. It is important that the correct interchangeable bushings are selected to match the cable being used. Please provide full cable description including ID & OD. Cable samples should be provided to TMAC to ensure correct sizing.

NOTE: The 2×2 Plus is available with or without bushings. Select square or chamfer cut bushings from the bushings tab. Please specify two bushings when ordering the 2×2 Plus.

Resources

Chamfer-Cut Bushings

Square-Cut Bushings