Belleville & Flange WashersSolon Belleville Springs are used in a variety of applications where high spring loads are required within a very small space. They are very effective where bolt tension loss occurs due to thermal cycling, contraction of bolted members and vibration-induced loosening.
Bolted Connectors and Terminals - PG ClampsBolted Connectors and Terminals - PG Clamps
Bolted Connectors and Terminals - Split BoltsSplit Bolt Connectors are available in electro-tinned brass or copper-plated brass and are used for joining bare overhead hard-drawn copper conductors or other bare stranded copper conductors
Connector Protection GreaseTmac® Connector Protection Grease is a non-conductive grease that permanently protects AI/Al and AI/Cu bolted parallel-groove clamps against corrosion in outdoor and indoor installations.
Ratchet SpannerThe ratchet spanner is designed for installing insulation piercing connectors and other aerial bundled cable fittings. Not an insulated tool.
Silver-Plating PowderCool Amp silver-plating powder is suitable for surface plating properly prepared copper, brass or bronze surfaces. A plating thickness of approximately 0.0025 mm is applied to the surface.
Split Bolt SpannerPlated steel line tap spanners are used to tighten split bolt connectors.