Ball ClevisPole and Line Hardware - Insulator and Support Fittings - Ball Clevis
Ball Hook Short ShankPole and Line Hardware - Insulator and Support Fittings - Ball Hook Short Shank
Belleville & Flange WashersSolon Belleville Springs are used in a variety of applications where high spring loads are required within a very small space. They are very effective where bolt tension loss occurs due to thermal cycling, contraction of bolted members and vibration-induced loosening.
Bird Diverter / Line MarkerBird Diverters / Line Markers are attached to an overhead line or cable to prevent bird strike and accidental contact of plant equipment in work areas. The diverter target swings freely in the wind and is easily seen by a bird in flight and plant operators. Birds veer away from the highly visible roundels. It is particularly effective for large, fast birds which may cause outages
Bolted Connectors and Terminals - PG ClampsBolted Connectors and Terminals - PG Clamps
Bolted Connectors and Terminals - Split BoltsSplit Bolt Connectors are available in electro-tinned brass or copper-plated brass and are used for joining bare overhead hard-drawn copper conductors or other bare stranded copper conductors
Bow ShacklePole and Line Hardware - Insulator and Support Fittings - Bow Shackle
Cable ClampsPolyamide, Glass-Fibre Reinforced Cable Fixtures
Clevis ThimblePole and Line Hardware - Insulator and Support Fittings - Clevis Thimble
Clevis TonguePole and Line Hardware - Insulator and Support Fittings - Clevis Tongue
Composite InsulatorsLine post, station post and long rod insulators for all voltages up to 1000 kV AC and DC.
Connector Protection GreaseTmac® Connector Protection Grease is a non-conductive grease that permanently protects AI/Al and AI/Cu bolted parallel-groove clamps against corrosion in outdoor and indoor installations.
Pole and Line HardwaresFittings are Galvanized or Investment Castings (Lost Wax) and made of forged steel or from steel castings to AS1154.1
Ratchet SpannerThe ratchet spanner is designed for installing insulation piercing connectors and other aerial bundled cable fittings. Not an insulated tool.
Screw AnchorsSocket-type screw anchor. High Strength helix with special shaped tip for wobble-free drilling.
Silver-Plating PowderCool Amp silver-plating powder is suitable for surface plating properly prepared copper, brass or bronze surfaces. A plating thickness of approximately 0.0025 mm is applied to the surface.
Socket Thimble16B socket design. Fitted with a 16 mm W clip, of 304 stainless steel
Socket Tongue16B socket design. Fitted with a 16 mm W clip, of 304 stainless steel
Split Bolt SpannerPlated steel line tap spanners are used to tighten split bolt connectors.
Stay BracketDesigned for 273 mm OD and 323 mm OD poles
Thimble Eye NutPole and Line Hardware - Insulator and Support Fittings - Thimble Eye Nut
Twisted Socket Tongue16B socket design. Fitted with a 16 mm W clip, of 304 stainless steel
Wildlife Guard / Varmint ShieldsInstalled in-between insulator sheds to prevent wildlife from simultaneously touching the live terminal and nearby metal work. Suitable for diameters of 45 mm to 152 mm.