INSTRUMENTS

Accessories Adaptors ALL Aluminium Cables Bolted Connectors and Terminals Cable Accessories Cable and Conductor Preparation Cable Test and Identification Communications Earths DCSR Controller DEMAND MANAGEMENT Digital Voltage Testers Drum and Cable Handling Fault Indicators Gloves, Boots and Helmets High Voltage Testers INSTRUMENTS Insulated Tools Insulating Mats, Covers and Ropes Load Units and Meter Testers Logging and Monitoring Equipment LV Test Lamps MATERIALS Multimeters Operating Sticks Outdoor Insulators Partial Discharge Phase Sequence Pole and Line Hardware Pole Platforms Portable Earthing Equipment Proximity Testers Rescue Kits Resistance Measurement SAFETY Temporary Bridging Temporary Crossarms Tension, Stringing and Lifting Test Lamp Accessories Test Lamp Kits TOOLS & EQUIPMENT Transformer Testing Voltage Tester Accessories Wildlife Deterrents Safety Communications Earths Gloves, Boots and Helmets Insulating Mats, Covers and Ropes Portable Earthing Equipment Rescue Kits Tools & Equipment Accessories Adaptors Cable and Conductor Preparation Drum and Cable Handling Insulated Tools Operating Sticks Pole Platforms Temporary Bridging Temporary Crossarms Tension, Stringing and Lifting Instruments Cable Test and Identification Digital Voltage Testers Fault Indicators High Voltage Testers Load Units and Meter Testers Logging and Monitoring Equipment LV Test Lamps Multimeters Partial Discharge Phase Sequence Proximity Testers Resistance Measurement Test Lamp Accessories Test Lamp Kits Transformer Testing Voltage Tester Accessories Materials Bolted Connectors and Terminals Cable Accessories Outdoor Insulators Pole and Line Hardware Wildlife Deterrents Demand Management Bolted Connectors and Terminals Cable Accessories Outdoor Insulators Pole and Line Hardware Wildlife Deterrents Electro-tinned copper Stainless steel threaded bolt or internal thread Self-locking nut (for threaded type) Share this item Contact us about this item Tmac® Cable Core Identifier Clearly identifies the cores and their sequence in a three-phase power cable. Indication of the action to be taken to correct the core sequence, or to remove a fault on any cable core(s). Uses a transmitter unit with LED indicators at the measuring end, and an array of colour-coded diodes with connecting clips to fix the diode leads to the remote end of the cable to be checked. The CCI is for use on DE-ENERGISED CABLES ONLY. Therefore correct operating procedures must be employed to ensure the cable is de-energised and any voltage discharged before connection of the CCI or its diode array. Features Indicates correctly matched cores & phase rotation sequences between ends Indicates individual faults such as -            -  Two phases reversed            -  Phases rotated forwards / backwards in sequence            -  Earths in place on cable            -  Equipment connected to cable (not properly isolated)            -  Open-circuited or short-circuited cores Self-test For cables up to 33 kV, lengths up to 10 km Specifications Charging Circuit Voltage: 3.8-4.4 V DC Charging Resistance: 100 _ Maximum cable core loop resistance: 28  _ Maximum core voltage drop: 1.4 V DC Nominal charging current: 50 mA Charging time (to 2 V DC): 100 ms Battery:  9 V IP Rating: IP32 Weight:  320 g Part No: CCI-AUS (complete unit) DIODELEADS (replacement diode and leads) BAGTEST (optional carry bag)   * Required First Name * Last Name * Email Address * Work Phone Number * Company Product Name Product Code Message Enter Word Verification in box below *

• ALL
• DEMAND MANAGEMENT
• INSTRUMENTS
• MATERIALS
• SAFETY
• TOOLS & EQUIPMENT